pycatia.dnb_human_modeling_interfaces.swk_ergo_lift_lower¶
Module initially auto generated using V5Automation files from CATIA V5 R28 on 2020-09-25 14:34:21.593357
Warning
The notes denoted “CAA V5 Visual Basic Help” are to be used as reference only. They are there as a guide as to how the visual basic / catscript functions work and thus help debugging in pycatia.
- class pycatia.dnb_human_modeling_interfaces.swk_ergo_lift_lower.SWKErgoLiftLower(com_object)¶
Note
CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
System.IUnknownSystem.IDispatchSystem.CATBaseUnknownSystem.CATBaseDispatchSystem.AnyObjectSWKErgoLiftLowerThis interface deals the lift/lower ergonomic analysis.- property coupling: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property Coupling() As CATBSTRReturns or sets the coupling condition for the lift/loweranalysis.The value of the parameter must be either “Good”, “Fair”, or“Poor”.N.B.: This coupling condition must be set beforeattemptingto retrive any output value from the study, if the input gudelineis “NIOSH1991”. Failure to do so will result in invalid outputvalues.
- Return type:
str
- property duration: float¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property Duration() As doubleReturns or sets the lift duration.This frequency must be expressed in hours per day, cannot be greaterthan 8.0 and must be specified before attempting to retrive any outputvalue from the study.Failure to do so will result in invalid output values.
- Return type:
float
- property frequency: float¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property Frequency() As doubleReturns or sets the lift frequecy.This frequency must be expressed in lifts per second, and mustbe specified before attempting to retrive any output value from thestudy.Failure to do so will result in invalid output values.
- Return type:
float
- property guide_line: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property GuideLine() As CATBSTRReturns or sets the guideline for the lift/lower analysis.The value of the parameter must be either “NIOSH1981”, “NIOSH1991”, or“SnookCiriello1991”.N.B.: This guideline must be set before attemptingto retrive any output value from the study, otherwise these outputswill have invalid values.
- Return type:
str
- property niosh_action_limit: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_ActionLimit() As CATBSTR (Read Only)This field is set to a valid value for the NIOSH 1981 analysis only.It is the weight below which the task could be considered reasonablysafe.
- Return type:
str
- property niosh_angle_of_asymmetry_final: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_AngleOfAsymmetryFinal() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the angular measure of how far the object is displacedfrom the front (mid-sagital plane) of the worker’s body at the ending of thelift, in in the current V5 units.This property gives the asymmetry angle at the destination(i.e., given the final posture of the manikin).
- Return type:
str
- property niosh_angle_of_asymmetry_initial: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_AngleOfAsymmetryInitial() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the angular measure of how far the object is displacedfrom the front (mid-sagital plane) of the worker’s body at the beginning of thelift, in in the current V5 units.This property gives the asymmetry angle at the origin(i.e., given the initial posture of the manikin).
- Return type:
str
- property niosh_asymmetric_multiplier_final: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_AsymmetricMultiplierFinal() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the asymmetric multiplier.This property gives the asymmetric multiplier at thedestination(i.e., given the final posture of the manikin).
- Return type:
str
- property niosh_asymmetric_multiplier_initial: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_AsymmetricMultiplierInitial() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the asymmetric multiplier.This property gives the asymmetric multiplier at theorigin(i.e., given the initial posture of the manikin).
- Return type:
str
- property niosh_coupling_multiplier_final: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_CouplingMultiplierFinal() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the coupling multiplier bases ont hte couplingclassification and vertical location of the lift (V).This property gives the coupling multiplier at thedestination(i.e., given the final
- Return type:
str
- property niosh_coupling_multiplier_initial: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_CouplingMultiplierInitial() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the coupling multiplier bases ont hte couplingclassification and vertical location of the lift (V).This property gives the coupling multiplier at the origin(i.e., given the initial posture of the manikin).
- Return type:
str
- property niosh_distance_multiplier: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_DistanceMultiplier() As CATBSTR (Read Only)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the distance multiplier.This property gives the distance multiplier.
- Return type:
str
- property niosh_frequency_multiplier: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_FrequencyMultiplier() As CATBSTR (Read Only)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the frequency depending upon the average of lifts/min(F), the vertical location (V) of the hand at the origin, and the duration ofcontinuous lifting.This property gives the frequency multiplier.
- Return type:
str
- property niosh_horizontal_location_final: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_HorizontalLocationFinal() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the distance of the hands from the mid-point betweenthe ankles, in in the current V5 units.This property gives the horizontal location at thedestination(i.e., given the final posture of the manikin).
- Return type:
str
- property niosh_horizontal_location_initial: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_HorizontalLocationInitial() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the distance of the hands from the mid-point betweenthe ankles, in in the current V5 units.This property gives the horizontal location at the origin(i.e., given the initial posture of the manikin).
- Return type:
str
- property niosh_horizontal_multiplier_final: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_HorizontalMultiplierFinal() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the horizontal multiplier.This property gives the horizontal multiplier at thedestination(i.e., given the final posture of the manikin).
- Return type:
str
- property niosh_horizontal_multiplier_initial: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_HorizontalMultiplierInitial() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the horizontal multiplier.This property gives the horizontal multiplier at theorigin(i.e., given the initial posture of the manikin).
- Return type:
str
- property niosh_li_final: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_LIFinal() As CATBSTR (Read Only)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides a relative estimate of the level of physicalstress.This property gives the lifting index at the destination(i.e., given the final posture of the manikin).
- Return type:
str
- property niosh_li_initial: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_LIInitial() As CATBSTR (Read Only)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides a relative estimate of the level of physicalstress.This property gives the lifting index at the origin(i.e., given the initial posture of the manikin).
- Return type:
str
- property niosh_load_constant: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_LoadConstant() As CATBSTR (Read Only)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the load constant.This property gives the load constant at the destination(i.e., given the final posture of the manikin).
- Return type:
str
- property niosh_maximum_perm_limit: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_MaximumPermLimit() As CATBSTR (Read Only)This field is set to a valid value for the NIOSH 1981 analysisonly.This value represents a weight limit, above which thetask is considered dangerous and requires engineering controls.
- Return type:
str
- property niosh_rwl_final: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_RWLFinal() As CATBSTR (Read Only)This field is set to a valid value for the NIOSH 1991 analysisonly.It represents the weight of the load, that healthy workerscouldperform over a certain period of time without risk.This property gives the recommended weight at thedestination(i.e., given the final posture of the manikin).
- Return type:
str
- property niosh_rwl_initial: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_RWLInitial() As CATBSTR (Read Only)This field is set to a valid value for the NIOSH 1991 analysisonly.It represents the weight of the load that healthy workerscould perform over a certain period of time without risk.This property gives the recommended weight at the origin(i.e., given the initial posture of the manikin).
- Return type:
str
- property niosh_travel_distance: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_TravelDistance() As CATBSTR (Read Only)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the absolute value of the difference between thevertical heights at the destination and origin of the lift, in in the currentV5 units.This property gives the travel distance
- Return type:
str
- property niosh_vertical_location_final: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_VerticalLocationFinal() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the distance of the hands above the floor, in thecurrent V5 units.This property gives the vertical location at thedestination(i.e., given the final posture of the manikin).
- Return type:
str
- property niosh_vertical_location_initial: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_VerticalLocationInitial() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the distance of the hands above the floor, in in thecurrent V5 units.This property gives the vertical location at the origin(i.e., given the initial posture of the manikin).
- Return type:
str
- property niosh_vertical_multiplier_final: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_VerticalMultiplierFinal() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the absolute value or deviation of V (verticallocation) from an optimum height of 30 inches (75 cm).This property gives the vertical multiplier at thedestination(i.e., given the final posture of the manikin).
- Return type:
str
- property niosh_vertical_multiplier_initial: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property NIOSH_VerticalMultiplierInitial() As CATBSTR (ReadOnly)This field is set to a valid value for the NIOSH 1991 analysisonly.This value provides the absolute value or deviation of V (verticallocation) from an optimum height of 30 inches (75 cm).This property gives the vertical multiplier at the origin(i.e., given the initial posture of the manikin).
- Return type:
str
- property object_weight: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property ObjectWeight() As CATBSTRReturns or sets the weight of the object being lifted.This weight must specified at least once, if the current input guideline is“NIOSH1991”.Failure to do so will result in invalid output values.
- Return type:
str
- property population: float¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property Population() As doubleReturns or sets the percentage of the population that should be able toperform the lift/lower task safely.This property can only take the values 50.0, 75.0 and 90.0,and must bespecifiedat least once, if the current input guideline is“NIOSH1991”.Failure to do so will result in invalid output values.
- Return type:
float
- save_final_posture() None ¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357))
- o Sub SaveFinalPosture()Saves the current posture of the mankin as the final posture for thelift/lower analysis.
- Return type:
None
- save_initial_posture() None ¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357))
- o Sub SaveInitialPosture()Saves the current posture of the mankin as the initial posture for thelift/lower analysis.
- Return type:
None
- property snook_maximum_weight: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property Snook_MaximumWeight() As CATBSTR (Read Only)This field is set to a valid value for the Snook/Ciriello 1991 analysisonly.It is the maximum acceptable weight of the load that the selectedpopulationcan lift or carry with reasonable safety.
- Return type:
str
- property warning_message: str¶
Note
- CAA V5 Visual Basic Help (2020-09-25 14:34:21.593357)
- o Property WarningMessage() As CATBSTR (Read Only)Returns an eventual warning message generated along with the study.
- Return type:
str